■ Application:
HP-DS-T06 the heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp terminals.
■ Characteristics:
● Shrink ratio 3:1
● Excellent conductivity property
● Excellent puncture resistance performance
● Excellent stretch and mechanical damage resistance
● High elasticity keeps steady performance
● Water proof and moisture resistance
● Operating temperature :-55 ℃ ~ 125℃
● Minimum shrink temperature:80℃
● Minimum fully recovery temperature:130℃
■ Technical Data:
Test Item | Characteristics | Test condition | |
---|---|---|---|
Unaged | Tensile strength | Min. 16MPa | Room temp |
Elongation | Min.200% | ||
Aged | Tensile strength | Min. 11.5MPa | 158℃7 days |
Elongation | Min. 100% | ||
Voltage withstand and breakdown |
Withstand 2.5KV for 1 minute and breakdown | Room temp. | |
Voltage withstand and breakdown Voltage(Unaged) |
Withstand 2.5KV for 1 minute and breakdown at least half of unaged breakdown voltage | 158℃/7 days | |
Copper corrosion | No corrosion of bare copper | 158℃/7 days | |
Copper stability | No sign of degradation Min. Elongation 100% | 158℃/7 days | |
Cold bend | No crack | -30℃4 hrs | |
Maximum secant modulus (2%) | 250MPa | - | |
Volume resistivity | Min. 1014Ω-cm | - | |
Heat shock | No crack | 250℃/4 hrs |
■ Size:
Part No |
D | d1 | B | E | L | Color | Conductor | Wall Of Cooper Terminal |
---|---|---|---|---|---|---|---|---|
HP-DS-T06R48 | 4.8 | 1.6 | 4.8*0.8 | 21 | 28 | Red | 0.5-1.0mm2 (AWG22-18) |
0.4mm |
HP-DS-T06B48 | 5.8 | 2.2 | 4.8*0.8 | 21 | 28 | Blue | 1.5-2.5mm2 (AWG16-14) |
0.4mm |
HP-DS-T06Y48 | 6.8 | 3.4 | 4.8*0.8 | 25 | 32 | Yellow | 3.0-6.0mm2 (AWG12-10) |
0.4mm |
HP-DS-T06R63 | 4.8 | 1.6 | 6.3*0.8 | 21 | 28 | Red | 0.5-1.0mm2 (AWG22-18) |
0.4mm |
HP-DS-T06B63 | 5.8 | 2.2 | 6.3*0.8 | 21 | 28 | Blue | 1.5-2.5mm2 (AWG16-14) |
0.4mm |
HP-DS-T06Y63 | 6.8 | 3.4 | 6.3*0.8 | 25 | 32 | Yellow | 3.0-6.0mm2 (AWG12-10) |
0.4mm |
Other sizes are available upon request.
■Color:
Standard color: Red, Blue,Yellow.